Manufacturers of : Gas Pumps, Vane Rotary Pumps, P.T.O. Units Equipment for Petroleum Installations etc.
Our range of products are : • Vane Rotary Pumps for Petroleum Oils. • Super Gasflo Pumps for LPG and Ammonia etc. • Pressure Vacuum Relief Valves for Petroleum Storage Tanks. • Hydraulic Pressure Test Pumps. • Heavy Duty SIDE PTO units for Trucks and Drilling Rigs. • Heavy Duty full Torque IN-LINE PTO units for Fire Engines. • Speed reducers upto 200 HP Load. • Hand operated Petroleum Quality Semi - Rotary Pumps etc.
 

SUPERFLO VANE ROTARY PUMPS being manufactured by us since 1965 are in use with INDIAN OIL CORP LTD., BAHRAT PETROLEUM CORP. LTD., INDIAN AIR FORCE, Govt. Departments and Industries all over India. These pumps are ideal for High Suction lift and overcome "Vapour Lock" on Petroleum lines while pumping volatile liquids such as Petrol, Kerosene, Diesel, thinners & Solvents. These Pumps are also suitable for pumping furnace oil, LDO, Lube Oils and other viscous liquids which are non-abrasive and non-corrosive. However the product to be pumped should be mentioned when ordering the Pump. The Pumps are offered in three Models i.e. with Direct Drive, Gear Drive and Belt Drive arrangements and complete with Flame Proof / Non-Flame Proof electricals.

POSITIVE DISPALCEMENT SUPERFLO VANE ROTARY PUMPS are designed to give High standard of mechanical efficiency. Maintenance time and cost are reduced to minimum due to slow speed. There is no metal friction in the cylinder since the pumps are provided with non metallic vanes.

There is no loss of efficiency with sliding vane design due to self adjusting wear characteristics. As wear occurs at the tips of the vanes, they project further out of the rotor slot to compensate for wear.

Differential Pressure setting of inbuilt Byepass valve can be set from 2 kg/cm2 to 4kg/cm2.

All Models are furnished with a built-in pressure relief valve to protect the pump and auxiliary equipment from damage due to excessive pressure. If the pressure reaches maximum set limit due to any interruption on the delivery side, the pressure relief valve actuates and the excess pressure is released into the inlet section of the pump.

MECHANICAL SEALS :

All Superflo Vane Rotary Pumps are provided with Mechanical seals on both ends of shaft to control leakage and protect the bearings from the liquid being pumped. They require no adjustment and are easily replaceable.

SELF PRIMING

All Superflo Vane Rotary Pumps are Positive Displacement in action and inherently self-priming under normal conditions within period of seconds.

The Superflo Range of Pumps are manufactured in following sizes and capacities:

SIZE
CAPACITY LPM
RPM RANGE
MOTOR HP
REQUIRED
25 X 25 mm
(1" X 1")
30 to 45
400 to 900
1 to 1.5 HP
38 X 38 mm
(1 1/2" X1 1/2")
60 to 90
400 to 900
2 to 3HP
50 X 50 mm
(2" X 2")
125 to 200
400 to 700
3 to 5 HP
62.5 X 62.5 mm
(2 1/2" X 2 1/2")
300 to 450
400 to 650
5 to 7.5 HP
76 X 76 mm
(3" X 3")
450 to 700
400 to 600
7.5 to 10 HP
100 X 100 mm
(4" X 4")
1000 to 1500
400 to 550
15 to 25 HP

In Order to recommend suitable Pump for specific requirement, the following data would be required:

  1. Capacity in LPM
  2. Liquid to be handled
  3. Suction Lift
  4. Discharge Head
  5. Specific Gravity of the liquid
  6. Viscosity
  7. Type of Drive required (Belt Drive / Gear Drive / Directly       Coupled)
  8. Temperature of the liquid
  9. Whether Flame proof electricals are required or Non-Flame
       proof
10. Layout site plan of Installation
11. Direction of rotation for bare shaft pumps.
12. Bare Shaft Pumps can be mounted on T/Trucks and driven       through P.T.O.